Products

DESCRIPTION

Overview

Basic Info.

Automation	Automatic
Computerized	Computerized
Machine Weight	4T
Certification	CE, ISO9001:2008, QS, GMP
Main Engine Frequency Converter	11kw
Screw Speed (R/Min)	0-85
Yield	20-40 Kg/H
Maximum Width of Film (mm)	200-600
Transport Package	Plastic Film/Bubble Film
Specification	9000x3500x5200mm
Trademark	CHAOSHUN
Origin	China
HS Code	8477309000

Product Description

Product Description

A+B+A three-layer co-extruded film blowing machine whether HDPE, LDPE or LLDPE has its unique characteristic materials. Through multi-layer co-extrusion, the physical strength of the film is improved, and the inner and outer layer materials supplied by the main engine are used, which can reduce the structure of the main body, while reducing the cost and energy consumption. The extruder adopts two same or different plasticizing extrusion methods to extrude the co-extruder head, so as to improve the physical properties of the film, increase its strength, so that the film has good barrier property and air tightness. The machine adopts the advanced continuous rotating head, the product smooth, good uniformity, to ensure the packaging machine, printing machine and other subsequent process equipment to the film quality requirements. Its main products include flat bags, T-shirts and garbage bags In addition to reducing the amount of raw material used in the formulation, another advantage of ABA machines is that they produce 3-layer films that are 30% stronger than those produced by single-layer extruders.ABA machines are also much more economical than ABC three-ply machines because they have fewer extruders. Flexible packaging bags, T-shirt bags, garbage bags, shopping bag films use a high percentage of recycled materials or CaCO3 in the middle layer, thus significantly reducing the cost of materials while producing a stronger film with higher resistance.

Main technical parameters

configuration parameter
Hard tooth face gear box (reduction box)	Gb Model 133*1 Model 133*1
Barrel screw	φ50 alloy screw *1φ50 alloy screw *1
Screw material	38CrMoAl
Length-diameter ratio	32:01:00
Screw speed (r/min)	0-85.
Minimum film width (mm)	280
Maximum width of film (mm)	200-600.
Minimum film thickness (mm)	Single side 0.01
Maximum film thickness (mm)	Single side 0.10
Barrel cooling fan	240W*4
Cylinder heating ring	Stainless steel heating ring
Main motor of extruder	11Kw*1* 11KW*1 Frequency conversion speed control
Main engine frequency converter	11Kw*1 11WK*1
Temperature controller
Head flange	embedded
Three-way heating ring	Ceramic heating ring
Hopper charging mode	manual
Main engine housing	integral
Paint color	The main model is made of off-white, and the railings are matched with turquoise
Frame square steel	10 #
yield	20-40 kg/h
Total height of auxiliary engine	The upper and lower layers of 4800mm are broken
Traction press roller adjustment mode	Manual adjustment
Traction frame construction	Bolted type
Traction roll length (mm)	The length of the roll surface is 900mm
Traction motor	1.5Kw frequency conversion speed control
Traction frequency converter	1.5 Kw
Traction speed (m/min)	0-80

Detailed Photos

Our Advantages

The company specializes in the production of various types of film blowing machine die head, die head plated with hard chromium, its structure is spiral mand-shaft, uniform discharge, smooth. The blowing film die head is composed of a die body (die core, die cylinder, die ring) and a heater (heating ring). The first selection, is to choose the corresponding material. The second step is forging, forging the material into the mold parts of the rough embryo, the molecular structure of the forged embryo is more dense. The third is to carry out lathe processing, according to the design drawings of the die head car out of the die head, in the lathe processing, as far as possible with high precision lathe, and skilled lathe master car. The fourth is polishing, polishing the runner part of the car mold, the better the finish, the better the blown film, the more no silk road. The fifth is chromium plating. The runner part of the polished mold is plated with chromium, so that the runner part has a layer of hard chromium, which increases the wear resistance and corrosion resistance of the die head and then polishing, which can make the mold not easy to damage and not easy to produce residual coke. Finally, the parts of the mold are installed and the heating ring is put on. Die head structure according to the characteristics of LDPE, HDPE, LLDPE three kinds of polyethylene, after many comparative tests for selecting and shaping, has the advantages of large internal pressure, stable and uniform extrusion, film strength performance is good, no crack and the extruder of this unit good match. At the same time changing the ratio of three kinds of polyethylene and mixed material, recycled material blowing film production can be done without replacing the die head on the method, only one; Take the method up, to the best. Zhengyu company always adhere to the principle of "people-oriented", in strict accordance with the modern enterprise system and standard management, actively create the best corporate culture, constantly absorb high-quality talents from all sides to join, inclusive, learn from others, our company has made great achievements, set up a good image in the industry, greatly enhance the brand competitiveness. Our company provides non-standard design, production and commissioning one-stop service, welcome customers with material test, inspection and ordering. Sincerely welcome new and old customers sincere cooperation, super shun will, as always, forge ahead, in order to build China's drying enterprise and forever forward, in the new century with you to create the first!

https://chaoshunmachine.en.made-in-china.com/company-Wenzhou-Chaoshun-Machinery-Co-Ltd.html